Self furring stucco netting is typically installed over building paper and 18 gauge lathers line wire for exterior Portland cement stucco wall applications.
Stucco netting is made from 17 gauge zinc coated galvanized wire, woven to a hexagonal shaped mesh.
Self furred 1/4" to help maintain spacing between netting and wall.
| Material |
Galvanized steel |
| Mesh |
1 inch, 2 inch |
| Wire |
0.7-0.9 mm |
1" x 20 gauge, 36" x 150'
1.Self-furred zinc coated galvanized steel woven stucco netting is designed for use as reinforcement for cement wall systems.
2.Our 1″ (25.4mm) hexagonal mesh is formed with a reverse twist of 20 gauge (0.89mm) galvanized steel wire.
3.1″ 20 stucco netting is furred at 3 inches (76mm) and 6 inches (152mm) on center horizontally and vertically, respectively.
4.Hexagonal woven wire netting is specially for exterior wall coatings, can be supplied with paperback or not.
1 1/2″ x 17 gauge,37" x 150'
1. 1 1/2″ x 17 gauge, zinc coated, galvanized woven wire Paperback Stucco Netting is made for building
as reinforcement wire materials for cement, gypsum plaster, masonry veneer and ceramic tile.
2. 1 1/2″ (38mm) x 17 gauge, 1/4″ self-furring woven wire in rolls, hexagonal mesh is formed with a
twist of 17 gauge (1.38mm) galvanized steel wire.Paperback Stucco Netting is furred at 6″ (152mm) vertically.
| Galvanized hex. wire netting in normal twist (width of 0.5M-2.0M) |
| Mesh |
Wire Gauge (BWG) |
| Inch |
mm |
| 3/8" |
10mm |
27,26,25,24,23,22,21 |
| 1/2" |
13mm |
25,24,23,22,21,20, |
| 5/8" |
16mm |
27,26,25,24,23,22 |
| 3/4" |
20mm |
25,24,23,22,21,20,19 |
| 1" |
25mm |
25,24,23,22,21,20,19,18 |
| 1-1/4" |
32mm |
22,21,20,19,18 |
| 1-1/2" |
40mm |
22,21,20,19,18,17 |
| 2" |
50mm |
22,21,20,19,18,17,16,15,14 |
| 3" |
75mm |
21,20,19,18,17,16,15,14 |
| 4" |
100mm |
17,16,15,14 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}